Apparently the lower arm mounting point on the the S15 subframe geometry provides more traction, so he modded the S13 subframe to match and he's testing, if it works, it will be a way cheaper, and way more easily attainable mod compaired to finding and shipping an S15 frame and the eccentric spacers.
He gusseted some stuff while he was working on it too!
Members from the processing circuit twice been there, it was strange alignment来ませんquite comfortable. But the cause is found, so adjust the 4th of May SUNRIZE's drive to join the Committee. Results of the highest Oh! ! Stop the car and was in traction consuming. This allows the gear ratio合わなくit went, and Def undo it. Def go back again to check the circuit. Until then enjoy the
Thanks Nate, but I think this will make more sense: Eisuke went to the circuit twice to test the subframe modifications but both times the alignment wasn't right but now he knows whats wrong so he'll redo the alignment and test at sunrize on the 4th. Update: Feels really good, has good traction and stops quicker when sliding sideways however the diff he installed with the subframe is not the right gear ratio so he'll throw the old diff back in. Please wait for the next update....